LT3466-1
PI FU CTIO S
V OUT1 (Pin 1): Output of Converter 1. This pin is connected
to the cathode of the internal Schottky diode. Connect an
output capacitor from this pin to ground.
SW1 (Pin 2): Switch Pin for Converter 1. Connect the
inductor at this pin.
V IN (Pin 3): Input Supply Pin. Must be locally bypassed
with a 1 μ F, X5R or X7R type ceramic capacitor.
SW2 (Pin 4): Switch Pin for Converter 2. Connect the
inductor at this pin.
V OUT2 (Pin 5): Output of Converter 2. This pin is connected
to the cathode of the internal Schottky diode. Connect an
output capacitor from this pin to ground.
FB2 (Pin 6): Feedback Pin for Converter 2. The nominal
voltage at this pin is 800mV. Connect the resistor divider
to this pin. The feedback voltage can be programmed
as:
V FB2 ≈ V CTRL2 , when V CTRL2 < 0.8V
V FB2 = 0.8V, when V CTRL2 > 1V
CTRL2 (Pin 7): Dimming and Shutdown Pin for Con-
verter 2. As the pin voltage is ramped from 0V to 1V, the
FB2 pin voltage tracks the CTRL2 voltage and ramps up to
0.8V. Any voltage above 1V does not affect the feedback
voltage. Do not leave the pin floating. It must be connected
to ground to disable converter 2.
R T (Pin 8): Timing Resistor to Program the Switching
Frequency. The switching frequency can be programmed
from 200KHz to 2MHz.
CTRL1 (Pin 9): Dimming and Shutdown Pin for Con-
verter 1. Connect this pin to ground to disable the con-
verter. As the pin voltage is ramped from 0V to 1.8V, the
LED current ramps from 0 to I LED1 (= 200mV/R FB1 ). Any
voltage above 1.8V does not affect the LED current.
FB1 (Pin 10): Feedback Pin for Converter 1. The nominal
voltage at this pin is 200mV. Connect cathode of the lowest
LED and the feedback resistor at this pin. The LED current
can be programmed by :
I LED1 ≈ (V CTRL1 /5 ? R FB1 ), when V CTRL1 < 1V
I LED1 ≈ (200mV/R FB1 ), when V CTRL1 > 1.8V
Exposed Pad (Pin 11): The Exposed Pad must be soldered
to the PCB system ground.
34661f
6
相关PDF资料
LT3466EDD#PBF IC LED DRIVR WHITE BCKLGT 10-DFN
LT3474IFE#PBF IC LED DRVR HP CONS CURR 16TSSOP
LT3475EFE-1#PBF IC LED DRVR HP CONS CURR 20TSSOP
LT3476EUHF#PBF IC LED DRVR HP CONST CURR 38-QFN
LT3477EFE#PBF IC LED DRVR HP CONS CURR 20TSSOP
LT3478IFE#PBF IC LED DRVR HP CONS CURR 16TSSOP
LT3486EFE#PBF IC LED DRVR WHITE BCKLGT 16TSSOP
LT3491EDC#TRMPBF IC LED DRIVER WHITE BCKLGT 6-DFN
相关代理商/技术参数
LT3466EDD-1#PBF 制造商:Linear Technology 功能描述:IC, LED DRVR, DFN10
LT3466EDD-1#TRPBF 功能描述:IC LED DRIVR WHITE BCKLGT 10-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极,PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT3466EDDPBF 制造商:Linear Technology 功能描述:Dual Full Func White LED contrlr,LT3466
LT3466EFE 制造商:Linear Technology 功能描述:LED DRVR 20Segment 3.3V/5V/9V/12V/15V/18V 16-Pin TSSOP EP
LT3466EFE#PBF 功能描述:IC LED DRVR WHITE BCKLGT 16TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:60 系列:- 恒定电流:- 恒定电压:- 拓扑:线性(LDO),PWM,升压(升压) 输出数:8 内部驱动器:是 类型 - 主要:背光 类型 - 次要:RGB,白色 LED 频率:500kHz ~ 1.5MHz 电源电压:4.75 V ~ 26 V 输出电压:45V 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* 工作温度:-40°C ~ 85°C
LT3466EFE#TRPBF 功能描述:IC LED DRVR WHITE BCKLGT 16TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极,PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT3467 制造商:LINER 制造商全称:Linear Technology 功能描述:700mA Low Noise High Current LED Charge Pump
LT3467A 制造商:LINER 制造商全称:Linear Technology 功能描述:700mA Low Noise High Current LED Charge Pump